![]() Connect the power cord to the set-top and the electrical wall outlet.ħ. ![]() Connect the Cable In terminal to the coaxial cable wall outlet.Ħ. Connect the audio and video cables in a manner matching that diagram.ĥ. Locate the cabling diagram(s) that best match the configuration.Ĥ. Otherwise, use the left and right (RCA phono) audio outputs.ģ. If the receiver or TV has a digital audio (S/PDIF) input, use the Digital Audio (S/PDIF) output.For a DVI video connection, additional audio connections to the TV are required.For an HDMI or IEEE-1394 video connection, no additional audio connections to the TV are required.Determine if you are connecting the audio to a home theater receiver or directly to the TV: ![]() The RF connection carries video and audio.Ģ. Use the RF Out connector on the DCX set-top, if the TV does not support S-Video or composite videoĬonnections. Out connector on the DCX set-top and the DVI input connector on the TV. ![]() or monitor If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or cable to the HDMI High-Definition TV (HDTV) Use the HDMI, component video (YPbPr), or IEEE-1394 outputs. This document will help you set up your DCX3501-M set-top to quickly get it up and running. Congratulations on receiving a Motorola DCX3501-M HD Dual Tuner DVR.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |